What
'
s included content
When informing users about what
s included in the kit you can use the texts below. These texts can b
e
accompanied by the
what
s included
product image that has corresponding numbers.
●
Title: What
s in the kit
●
Description: Everything you need to assemble the upgrade is in the
box. There are no specials
tools needed and you
Ill be finished in an hour.
1.
Fully assembled print head
○
The print head comes fully assembled with all parts and wires in place. The new
fancaps
ensure the airflow is aimed perfectly below the nozzle and equally from both sieves
its duck
the new Sunon fans are more silent than ever. The heater cartridge is now 35W whi
ch
improves heat up times and print speeds. The PTFE insulator is made from TFM,
which
has a longer life span. We've removed the spring and implemented a spacer, this p
ext
less pressure on the PTFE insulator which also expands its life span. We're using
a new
sensitive PT-100 temperature sensor, it provides accurate readings so you can t
weak the
settings with precision.
2.
Swappable nozzles
○
Thanks to the swappable nozzle, you can quickly switch between different nozzles
zles. The
standard nozzle size is 0.4 mm, but you also have the option to
use a 0.25 mm nozzle for
detailed prints or a 0.6 mm/0.8 mm for firmer prints.
3.
Geared feeder motor
○
A new geared feeder motor is included that connects to the geared feeder.
4.
Geared feeder
○
The innovative feeder allows you to easily swap filament and choose the c
correct
pressure for your filament. For example with a softer filament you
ll need to choose a
lower pressure. Such control increases the success rate of your prints. It also feat
ures a
lever which, when raised, lets you manually insert or remove filament.
5.
Print head shafts
○
New print head shafts are included, just in case you
ll bend your current print head
shafts while removing the print head.
6.
Ultimaker calibration card
○
A calibration card is included to level the build plate to the co
correct height.
7.
Filament reel holder
○
To save desktop space, a shorter filament reel holder is included.
8.
Axis tools
○
The axis tools are included to correctly remove and insert the print head shaft
pp. The axis
alignment tools are included to properly align the print head shafts for as
little friction
as possible.
9.
Build plate clamps
○
New build plate clamps are included that are much easier to open and close
by hand.
This allows you to easily remove the glass plate for cleaning or access to ap
rint.
10.
+
stickers