Fremragende | Baseret på 600+ anmeldelser
Spare part - 228x255mm - SpiderFlexiPlate - Magnet with SpiderSheet (without steel plate) (Ex. Ultimaker 2+)
På lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
Then Spider has come up with a SpiderFlexiPlate System! Are you tired of not being able to get your project out of building board, and would you like to have an even surface to print on? Then the SpiderFlexiPlate System is the answer! You get a uniform and straight surface because the base plate is made of metal and then the surface of the SpiderFlexiPlate System is made of magnet, on which the well-known SpiderSheet is mounted, so you are sure that your enme is stuck during printing.
- Your print gets a good adhesion!
- Your print is easy to remove again!
- Easy to assemble and disassemble.
Then Spider has come up with a SpiderFlexiPlate System! If you are tired of not being able to get your project from building board, then the SpiderFlexiPlate System is the answer! You get a uniform and straight surface because the base plate is made of metal and the surface is a magnet with a SpiderSheet attached. When removing the workpiece, be sure to let your build plate cool completely before removing your workpiece using the SpiderFlexiPlate System.
Easy mounting and dismounting! The underside is a thin metal plate with a glue sheet. The glue sheet must be peeled off and then placed on your building board. The surface of the SpiderFlexiPlate System is a magnetic plate on which the well-known and very popular SpiderSheet is mounted. This magnetic plate will easily adhere to the metal plate. Then it's just a matter of starting your print. In this way, you are sure that your subject is stuck during printing and that the subject is easy to remove afterwards.
Use isopropyl alcohol or window/glass cleaner when cleaning your SpiderSheet. Take good care of your surface and do not drive the nozzle too close. In case of damage or lack of cleaning, a new FlexiPlate with SpiderSheet will be required.
Tekniske specifikationer
Brand
Spider
Vægt
0.5 kg
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.
Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.
Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.
Vil du vide mere om vores returregler, læs dem her
Vi ser frem til din ordre 😍
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30