Raise3D - Hyper Speed ​​Upgrade Kit - Pro3 Series

NOTE : 30 - 45 day delivery time.

The Hyper Speed ​​Upgrade Kit is the first product from Raise3D's Hyper FFF technology. With the upgrade, the print speed of a Pro3 Series 3D printer increases from an average of 50-80 mm/s to 200-350 mm/s. Likewise, acceleration is increased from 1,000 mm/s2 to 10,000 mm/s2 without loss of accuracy or part quality.

The set contains :

• Installation instructions
• Software Upgrades
• Two Hyper Speed ​​Hot Ends 0.4mm (Pro3 series only)
• A Hyper Speed ​​Auto Calibrator (Pro3 series only)
• A spool of Hyper Speed ​​​​PLA Filament White 1 kg / 1.75 mm
• A spool of Hyper Speed ​​​​ABS Filament Natural 1 kg / 1.75 mm

Hyper Speed ​​ABS filament

Hyper Speed ​​​​ABS Filament is one of the specially developed filaments from the High-speed filament line for FFF printing. During high-speed printing, the filament is quickly fed into the heat block and the polymer has a very short time to melt, which can cause nozzle clogging and poor bond quality between the layers. In addition, ABS can be subject to warping and delamination of the printed part during high-speed printing without a heated chamber.

With optimized molecular weight and stiffness, Raise3D Hyper Speed ​​ABS can achieve faster melting and cooling during high-speed printing, resulting in lower temperature gradient and internal stress of the printed part. With almost no warping and improved bonding between layers, Hyper Speed ​​ABS is also perfectly suited for many functional prototype parts, tools and fittings with many different finishing options.

Print settings:

• Nozzle temperature: 210-260 ℃
• Print speed: 25-300 mm/s
• Build platform temperature: 55-65℃
• Layer height: 0.1 – 0.2 mm
• Dry temperature: 50 ℃

Hyper Speed ​​PLA Filament

Hyper Speed ​​PLA filament is one of the specially developed filaments from the High-speed filament line for FFF printing. When printing at high speeds, the filament is quickly fed into the heat block and the polymer has very little time to melt from solid to molten state, which can cause nozzle clogging and poor bond quality between the layers. With optimized molecular weight and tuned flowability, Raise3D Hyper Speed ​​PLA can achieve faster melting at the hot end and much faster cooling after the material has been extruded. As a result, the surface quality of parts printed by Hyper Speed ​​filaments is smooth and most of the sharp details are preserved. Most importantly, thanks to optimized molecular weight, Hyper Speed ​​PLA shows excellent interlayer bond quality and Z direction strength. Therefore, Hyper speed PLA can be used for concept models and figures, prototyping, etc.

Print settings:

• Nozzle temperature: 200-230 ℃
• Print speed: 50-300 mm/s
• Build platform temperature: 45-60℃
• Layer height: 0.1 – 0.2 mm
• Dry temperature: 40 ℃

Hyper Speed ​​Auto Calibrator

With this automatic frequency calibrator, the Pro3 Series printer will be able to measure its own frequency and adjust the parameters itself. With the Pro3 series' robust construction and stable design, the printer can maintain its own frequency for months without switching. It is recommended that the calibration process be performed every 2-3 months. A manual calibration process is also included.

Hyper Speed ​​Hotend 0.4mm

High flow speed hotends designed for the Pro3 series in Hyper Speed ​​Mode

Please note that in order for the Hyper Speed ​​to function properly, the Hyper Speed ​​Hot Ends 0.4mm (Pro3 series only), the Hyper Speed ​​Auto Calibrator (Pro3 series only) and the Hyper Speed ​​filaments must be installed on a Pro3 series printer enabled with Hyper Speed ​​Mode. The absence of any of these components can result in printout errors

På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret

Klik her og gå til dokumentation

Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.

Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.

Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.

Vil du vide mere om vores returregler, læs dem her

Vi ser frem til din ordre 😍