PrimaCreator - Raise3D Pro2 - Plated Copper Ruby Nozzle 0.4mm - 1 pcs

The Ruby nozzle is the latest addition to the PrimaCreator nozzle series.

A regular brass nozzle is most often recommended, as they have a better conductivity when it comes to heat. But a brass nozzle also has its disadvantages. If you want to print with an abrasive material such as carbon or glow in the dark filament, a regular brass nozzle will wear out in a very short time. Therefore, you can choose to use a hardened steel nozzle, it does not wear out as quickly as a brass nozzle, but it is made of steel and as a material it is not optimized to be used as an "everyday nozzle", as the thermal conductivity is not so good as in a brass nozzle.

The Ruby nozzle has the same plated copper as in PrimaCreator's regular nozzles, but in addition a small one has been added ruby gemstone at the tip of the nozzle. This turns a regular plated copper die into a die you can use with your standard filament like PLA, ABS, PETG, etc. to the more abrasive ones like carbon filled filament, metal, glow in the dark, wood - pretty much most types of "nozzle killer filament" currently on the market.

Finally, you can use one nozzle for all your materials.

All ruby ​​nozzles from PrimaCreator are made from it best quality copper with a genuine ruby ​​tip . They are completed in a state-of-the-art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface during extrusion, which naturally results in better prints.

For best results and optimal print quality, we strongly recommend that you re-level your build plate when switching to a new nozzle. Note that a Prima Creator nozzle may be compatible with your printer, but the distance between the nozzle and the build plate must be adjusted.

The process of making a Prima Creator nozzle begins with a selected high quality material. When the material arrives at the factory, an optical inspection is first made of the material to be used for each batch of nozzles. Then it's time to squeeze the material, in other words to make it into a long rod. In our process this is done only once, in many other (cheaper) cases this process has to be repeated several times, often up to 3-4 times, and still you don't get the same result. After this process, the material goes through an ultrasonic cleaning bath, after which it is cleaned again and protected against surface oxidation.

The die will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.

The process of removing sharp edges from the nozzles is a very important step, as this makes up a large part of the result. If there are too many sharp edges left on the nozzle, the nozzle will be more prone to clogging. It is therefore important that the nozzle is very smooth and clean before it is used. In each lot, a few nozzles are selected and cut in half to ensure that all specifications are met and that the surface is in perfect condition.

The nozzles are then checked one last time and individually packed in a protective box - ready to be sent to you.

Ruby nozzle from PrimaCreator is the perfect choice for people who only want the best at a good price!

Advantages of a ruby ​​nozzle?

• All filaments, one nozzle
• Extreme durability
• Perfect for highly abrasive filaments such as carbon, glow in the dark, fiberglass, metal and wood.
• Perfect diameter without jagged edges for better print quality

På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret

Klik her og gå til dokumentation

Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.

Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.

Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.

Vil du vide mere om vores returregler, læs dem her

Vi ser frem til din ordre 😍