Fremragende | Baseret på 600+ anmeldelser
PrimaCreator - MK8 - Nickel Plated Copper Nozzle - 0.6mm - 1pcs
På lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
PrimaCreator MK8 Nickel Plated Copper Nozzle 0.6mm - 1pcs
Having a high quality nozzle is like having a sharp pencil, you need it to get a good print.
The perfect choice for people who want only the best and at a great value!
Note that a PrimaCreator nozzle may be compatible with your printer, but the distance between the nozzle and the build plate must be adjusted
Fits: Creality CR-10 Series, MakerBot Replicator 2, CraftBot Series and others.
All nozzles from PrimaCreator are made of the best brass, copper or high quality steel (depending on the type) All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface during extrusion, which naturally results in better prints.
The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, an optical inspection is first made of the material to be used for each batch of nozzles. Then it's time to squeeze the material, in other words, make it into a long rod.
After this process, the material goes through an ultrasonic cleaning bath, and then it is cleaned again and protected from surface oxidation.
The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.
The process of removing sharp edges from the nozzles is a very important step, as this makes up a large part of the result. Leaving too many sharp edges on the nozzle will make the nozzle more likely to clog. So it is important that the nozzle is very smooth and clean before use. In each batch, a few dies are selected and cut in half to ensure all specifications are met and the surface is in perfect condition.
The nozzles are then checked one last time and individually packed in a protective box - ready to be shipped to you.
Tekniske specifikationer
Brand
PrimaCreator
Vægt
0.2 kg
EAN
7340002112022
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.
Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.
Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.
Vil du vide mere om vores returregler, læs dem her
Vi ser frem til din ordre 😍
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30