1-2 dages levering
Gratis fragt over 399,-
40.000+ tilfredse kunder
Fremragende | Baseret på 600+ anmeldelser
Duet DUEX5 Expansion Board
Kun 1 på lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
1pcs DUEX5 expansion board and some plugs and jumpers.
Description The Duex5 has the following features:
- 5 additional TMC2660 stepper motor drivers with stall notification
- 5 additional extruder heater outputs
- 5 servo outputs with 5V power and 5V signal levels, sharing control channels with the heaters, so you can use unused heater channels to drive servos
- 5 additional endstop inputs with indicator LEDs and 3.3V/5V voltage selection. These are also usable as outputs
- 6 additional controlled fan outputs, also usable for driving LEDs etc. The output voltage may be switched between 5V, 12V and VIN
- 4 uncommitted general purpose I/O pins
- 12V switching regulator, for generating a 12V supply for fans, LEDs etc. when the VIN power is higher than 12V
- 5 additional thermistor inputs
- Support for 2 more thermocouple or PT100 daughter boards, supporting up to 4 more sensors
- Optional 5V external power input for powering servos, fans etc.
1pcs DUEX5 expansion board and some plugs and jumpers.
Description The Duex5 has the following features:
- 5 additional TMC2660 stepper motor drivers with stall notification
- 5 additional extruder heater outputs
- 5 servo outputs with 5V power and 5V signal levels, sharing control channels with the heaters, so you can use unused heater channels to drive servos
- 5 additional endstop inputs with indicator LEDs and 3.3V/5V voltage selection. These are also usable as outputs
- 6 additional controlled fan outputs, also usable for driving LEDs etc. The output voltage may be switched between 5V, 12V and VIN
- 4 uncommitted general purpose I/O pins
- 12V switching regulator, for generating a 12V supply for fans, LEDs etc. when the VIN power is higher than 12V
- 5 additional thermistor inputs
- Support for 2 more thermocouple or PT100 daughter boards, supporting up to 4 more sensors
- Optional 5V external power input for powering servos, fans etc.
Tekniske specifikationer
Brand
Spider
Vægt
0.2 kg
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.
Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.
Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.
Vil du vide mere om vores returregler, læs dem her
Vi ser frem til din ordre 😍
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30
Duet DUEX5 Expansion Board
Du kiggede tidligere på
Se hvad vores kunder har skabt
