Ultrafuse® PLA - White - 2.85mm - 4.5kg

Ultrafuse PLA

Ultrafuse PLA is poly-lactic acid, a biodegradable polymer with a low melting point. It is an easy material to print with, and Ultrafuse PLA gives a smooth print result. This most used 3D printing material is available in a wide range of RAL colors and transparent variants.

When PLA is properly cooled, it has a higher maximum print speed, lower layer heights and sharper corners. The combination of this and low bias in the print makes it a popular plastic for manufacturers, prosumers and schools.

Tips and tricks

• Printing temperature: 210-220 degrees
• Heated bed: 60 degrees
• Print speed: 30-80 mm/s

Material properties

• Tensile strength (MPa): 21.2 (ZX), 34.7 (XY)
• Flexural modulus (MPa): 1715 (ZX), 1708 (XZ), 1860 (XY)
• Elongation at break: 1.2% (ZX), 4.2% (XY)
• Impact strength Izod marked (kJ/m2): 1.6 (ZX), 2.1 (XZ), 3.3 (XY)
• Impact strength Izod uncured (kJ/m2): 4.7 (ZX), 9.6 (XZ), 11.0 (XY)
• HDT @ 0.45 MPa: 65 oC

BASF quality control

The best available raw materials are selected from recognized suppliers. Production on the latest computer-controlled machines guarantees a truly uniform thread, also between colors and batches. It will work as expected every time.

All BASF products are 100% traceable to the source.

På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret

Klik her og gå til dokumentation

Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.

Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.

Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.

Vil du vide mere om vores returregler, læs dem her

Vi ser frem til din ordre 😍