Fremragende | Baseret på 600+ anmeldelser
FormFutura EasyFix Adhesive - No. 1 - 120ml
På lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
EasyFix - No.I is a general purpose 3D printing adhesive specially designed to work with: PLA, PETG, ABS, ASA, HIPS and several FLEX filaments. However, can also work with other materials.
EasyFix adhesives are designed to bond well to a heated build plate so that an object adheres firmly to the build plate. On the other hand, it also has excellent release properties when the build plate is cold. This makes it very easy to remove a printed item from the build plate, while reducing the risk of damaging the build plate and the printed item during the process.
How to use EasyFix
Shake the bottle of EasyFix thoroughly before use. Make sure your 3D printer build plate is clean and at room temperature before applying EasyFix to your 3D printer build plate. Press the applicator sponge down on the build plate for EasyFix to saturate the applicator sponge. Allow the EasyFix adhesive to gradually saturate the applicator sponge. Never squeeze the bottle!
Once the applicator sponge is saturated, you can begin to apply the EasyFix adhesive evenly to the printable surface of your 3D printer build plate. Make sure your 3D printer's z-height is correct before starting your 3D print. The EasyFix adhesive sticks when your build plate is heated.
Wait for the build plate on your 3D printer to cool to room temperature before removing your 3D printed part. EasyFix 3D printing adhesive has excellent release properties, causing your 3D printed item to detach from the 3D printer build plate as it cools down. If it is still difficult to remove the 3D printed item, you can apply a small amount of warm water to the printed item and the printer surface. Allow the water to creep under the 3D printed part before slowly removing it.
A build plate prepared with EasyFix adhesive can be used for multiple 3D prints.
Tekniske specifikationer
Brand
Formfutura
Vægt
0.7 kg
EAN
8719956555480
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Fragt bliver igennem 3D eksperten beregnet ud fra vægt og destination. Dette gælder udelukkende for pakker til Danmark. Grønland og Færøerne har særlige fragtpriser.
Kontakt os venligst herom for den mest fordelagtige løsning.
Vi leverer fortrinsvis med GLS på pakkeforsendelser og Post Danmark (Maxibrev) til småforsendelser uden tracking og forsikring.
3D Eksperten har variable fragtpriser. Disse priser udmåles automatisk i forhold til din ordrestørrelse/vægt og er tilpasset i henhold til GLS/Post Danmarks leveringspriser. Prisen kan variere fra 29,- til 400,-. ex. fragtforsikringer for særligt udsat gods.
Afhentning kan normalt godt ske fra vores virksomhed mellem kl. 08 og 14 på hverdage, men du SKAL skrive forinden. Det er ikke alle varer der findes på vores eget lager, men sendes direkte fra leverandørerne.
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30