Fremragende | Baseret på 600+ anmeldelser
CreatBot - PEEK-300
På lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
CreatBot - PEEK-300
Call 29870966 if the printer is of interest
CreatBot PEEK-300 is a new 3D printer in industrial quality that puts full focus on high-performance materials such as PEEK and PEI. The printer is designed for high reliability and economical 3D printing of high performance functional materials.
* Large building volume of 300x300x400
* Double extruder
* Resume printing after power failure
* Automatic pause if the filament runs out
* Print temperature up to 500°C
* Heated construction plate 200°C
* Heated building chamber 120°C
* Water cooled system
* Closed print chamber
* Automatic and manual leveling of the building plate
* 4.3" touch screen
* HEPA air filtration
Large print area
PEEK-300 has an impressive construction space of 300x300x400 mm. It has long been in demand that a machine can print PEEK in a large size.
Dual extruders
The PEEK-300 extruders include an intelligent cooling system. This ensures that the filament is constantly fed with the optimum temperature. The height-adjustable nozzles allow you to adjust your two nozzles quickly and easily. Perfect when you want to 3D print with support, varied materials or just two colors.
Liquid cooling
The cooling system is one of the most important components of a printer that can reach high temperatures. The PEEK-300 has a newly developed liquid cooling system that circulates the water in the hot end and keeps it at an optimal temperature.
Air pump cooling
To assist the liquid cooling system, the PEEK-300 also has an air pump cooling system. The feature that sets this printer apart from others is that it takes cool air from outside, instead of just using the warm air inside the printer.
Filament detection system
If you should run out of filament during a 3D print, don't worry. The 3D printer goes into pause mode and lets you change the filament - then just press resume, easy!
Continuing 3D printing
Should you have an unexpected power failure, the PEEK-300 remembers the last known position, stores it, lowers and retracts the filament. When the power comes back on, you can continue your 3D print.
High temperature 3D printing
The nozzles can operate at temperatures up to 500°C. This means that you can use a wide variety of filaments, including PEEK. See some of the 3D Expert's Industrial filaments here.
Closed and heated print area
The build chamber of PEEK-300 can be heated to 120°C. Thanks to this function, the printer can maintain a constant temperature, which means that there is less risk of cracks and distortions in your print.
Heated building plate
The build plate of PEEK-300 can reach 200°C. This is important if you want to print materials such as PEEK, PEKK and similar materials.
Print with precision and speed
With the PEEK-300, CreatBot has taken everything one step further when it comes to speed, precision and reliability. Resolution up to 0.04 mm and a print speed up to 120 mm/s (40-60 mm/s optimal speed). Combine this with a powerful direct drive setup and you have a printer that performs optimally every time you use it.
Closed print chamber
On the CreatBot PEEK-300, you have a completely closed print space that prevents large 3D prints from being cracked or warped.
Construction an Technical Details | |
Unusable Nozzle Type | MK8 |
Unusable Filament Diameter | 1.75 mm |
Max Nozzle Temperature | 500ºC |
Open Filament System | Yes |
Extruder Type | direct drive |
Recommended Printing Speed Max | 150 mm/s (depends on material)) |
Build Area | 300mm x 300mm x 400mm |
Dual Build Area | 300mm x 300mm x 400mm |
Build Plate Temp Max | 200ºC |
Build Plate Surface | carbon fiber sheet, removable |
Build Plate Material | Aluminum plate |
Build Plate Attachment | fixed |
Build Plate Leveling System | BL Touch |
Build Chamber During Process | Open or Closed |
Build Chamber Heated | Yes, max 120°C |
Filament Chamber Closed | Yes |
Extruder Number Of | 2 |
Extruder Construction Type Dual | Dual-head with electronic lifting system |
Installation Space / Requirements | |
Total Mass Overall Dimensions | 650mm x 600mm x 750mm |
Total Weight | 100 kg |
Ambient Operating Temperature | 15°C - 32°C |
Max Power Consumption | 3000W |
Voltage | AC: 230 V (50-60 Hz) |
Equipment | |
Emergency Shutdown | Yes |
Hepa Filter | Yes |
Filament Runout Sensor | Yes |
Power Loss Fail Safe | Yes |
Touch screen | Yes |
Camera | Yes |
Connection | |
USB port | Yes |
Wi-Fi | No |
Accuracy | |
Layer Height | 0.04 - 0.5 mm |
Resolution | 0.04 mm |
Shipping | |
Shipping Box | 820mm x 650720mm x 1080mm |
Shipping Weight | 130 kg |
Tekniske specifikationer
Brand
Creatbot
Vægt
130.0 kg
EAN
0715235125601
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Fragt bliver igennem 3D eksperten beregnet ud fra vægt og destination. Dette gælder udelukkende for pakker til Danmark. Grønland og Færøerne har særlige fragtpriser.
Kontakt os venligst herom for den mest fordelagtige løsning.
Vi leverer fortrinsvis med GLS på pakkeforsendelser og Post Danmark (Maxibrev) til småforsendelser uden tracking og forsikring.
3D Eksperten har variable fragtpriser. Disse priser udmåles automatisk i forhold til din ordrestørrelse/vægt og er tilpasset i henhold til GLS/Post Danmarks leveringspriser. Prisen kan variere fra 29,- til 400,-. ex. fragtforsikringer for særligt udsat gods.
Afhentning kan normalt godt ske fra vores virksomhed mellem kl. 08 og 14 på hverdage, men du SKAL skrive forinden. Det er ikke alle varer der findes på vores eget lager, men sendes direkte fra leverandørerne.
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30