3DE Premium - PLA X-Strong - Black - 1.75mm - 1kg

X-Strong from 3DE Premium is a brand new material! 8 times stronger than ordinary PLA and is easy to print with.

Colour: Black

Diameter: 1.75mm

Material: PLA

Weight: 1kg

Brand: 3DE Premium

Type: X-Strong

3DE Premium PLA is a perfect choice for a good everyday PLA 3D print material. It is a non-toxic filament and has no unpleasant odor during printing. The coil is black and simple - a simple clean design! Polyacetic acid (PLA) is a biodegradable polymer made from lactic acid - it is made from corn or other environmentally friendly biomaterial. 3DE Premium prints well between 190°C-210°C and is an easy PLA to print with. It can be printed on a cold bed, but we recommend around 45-60°C on a bed to ensure a good first layer bond.

We recommend 3DE Premium for all kinds of jobs - you will often see that the new 3DE Premium will do much better than other materials - this is because we use a new form mix in production, which means that the strength of the thread and the final print is much higher than many other PLA filaments.

3DE Premium can be used on acrylic, glass, aluminum, PEI sheet, PC sheet, Kapton, 3M tape and many other materials - with or without glue or other adhesives. All 3DE Premium coils are packed with 1 kg of material and weigh approx. 1.4 kg in total (with coil). All coils are vacuum packed with silica gel balls to avoid moisture. 3DE Premium is supplied in 1.75mm and 2.85mm to ensure that all normal types of 3D printer can use our filament. We ensure a perfect roundness and close diameter control of the filament - this will ensure that you will receive a good quality filament for your 3d printer.

3DE Premium is the best selling 3D printer filament in our store. We are known all over the world for our low price and high quality.

We recommend 3DE Premium because:

* Very easy to print with - even at low temperatures.

* Low warping filament

* It is environmentally friendly

* No unpleasant odors or particles

* Prints at around 195-205°C.

* Heatbed not necessary - 60°C, if possible.

* Tolerance: ± 0.05 mm

* Spool Size: 200 x 55mm

* Spool Hub Diameter: 53mm

På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret

Klik her og gå til dokumentation

Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.

Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.

Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.

Vil du vide mere om vores returregler, læs dem her

Vi ser frem til din ordre 😍