Thought3D - Drywise In-Line Filament Dryer - 2.85mm

Note the extended delivery time

Filament drying box from Though3D provides the best starting point for the perfect print. Can be used with your 2.85mm machine.

The Drywise filament dryer removes the uncertainty when printing hygroscopic materials. Drywise needs about 50 minutes to pre-treat your filament and bring it to the best printing conditions before 3D printing can start. An in-line drying design ensures that long 3D prints will always be printed with consistent material dried to the best printing conditions.

Advantages of a filament dryer:

Hygroscopic FDM filaments tend to absorb significant amounts of moisture from the environment over the course of a few days. Some materials cannot be printed out of the box due to high moisture levels already present in the material.

The presence of moisture in filaments can cause visible traces during printing, including: poor surface finish, stringing and seepage.

Moisture in filaments can potentially cause errors during printing and affect the mechanical properties of the part

As a result, moisture-sensitive materials must be dried before printing, but without special storage or pre-treatment the print quality can still deteriorate noticeably - especially during a long print job.

Key Specifications:

Fast

An in-line design dries only the part of the filament that is 3D printed, reducing the amount of work required.

Intelligent

Smart sensors help to dry the filament to the most optimal condition for printing and at the same time ensure that you avoid overheating and overdrying.

User friendly

A user-friendly UI guides the user all the way. Replaceable and rechargeable desiccant cartridges will increase run time.

Security

Smart sensors detect idling moments and turn off heaters to increase safety.

Upgrade

The list of certified filaments with calibrated settings is constantly growing.

På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret

Klik her og gå til dokumentation

Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.

Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.

Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.

Vil du vide mere om vores returregler, læs dem her

Vi ser frem til din ordre 😍