Snow White - 3DE Premium Ceramic 500g - 2.85mm (SKADET EMBALLAGE)

The basic printing characteristics of 3DE Ceramic is a lot like what you get from PLA – This means that it is 100% compatible with existing extrusion-based (FDM/FFF) 3D printers and extremely easy to work with.

Typical printing conditions:

• Nozzle temperature : 190-195C hot end
• Build surface : adheres well to common build surfaces including the blue tape, SpiderSheet, polyimide/Kapton tape, etc.
• Heated bed : not required, but can be set to 60-70 ˚C for better adhesive.
• Layer adhesion and warping resistance : similar to PLA; you can easily print large parts without warping and/or delamination.
• Odor : minimal (barely noticeable)

Mechanical/thermal properties of PolySmooth (based on 3D printed parts with 100% infill):

• Tensile strength : 40-45 MPa (compared to 30-40 MPa for PLA/ABS)
• IZOD Impact Strength : 15-18 kJ/m^2 (compared to 2-3 kJ/m^2 for PLA and 5-15 kJ/m^2 for ABS)
• Softening Temperature : ~ 70 C (compared to 55-60 C for PLA and 90-95 C for ABS)

500g material on the spool

• 3D print your part with 3DE Ceramic, just like what you normally do with PLA;
• Dip your printed object in IPA (70-90%+)(SPRIT)
• Repeat until you like the polished finish
• Now go tell your friends :-)

• Isopropyl alcohol (also known as isopropanol)
• Ethanol

IPA with no less than 70% (90% or higher recommended). You can choose whatever is more easily available for you.

På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret

Klik her og gå til dokumentation

Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.

Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.

Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.

Vil du vide mere om vores returregler, læs dem her

Vi ser frem til din ordre 😍