3DE Premium - PLA Silky - Dark Blue - 2.85mm - 1kg

• Silky PLA from 3DE Premium
• Easy to print
• Gives a nice silky look
• Low warping
• No heated bed required

3DE Premium PLA is a very good everyday PLA 3dprint material. It is a non-toxic filament and has no unpleasant smell while being printed. The spool is black and simple – a simple clean design!

Polylactic Acid (PLA) is a bio-degradable polymer which is produced from lactic acid – it's made from corn or other ecofriendly biomaterial. 3DE Premium will print well between 190C-210C and is an easy PLA to print.

It can be printed with a cold bed but we recommend around 45-60C on the bed to ensure a good first layer bonding. We recommend 3DE Premium for all kind of jobs – you will often see that the new 3DE Premium will do much better than other materials – this is because we use a new formulation mix in the production which means that the strength of the filament and final print is much higher than many other PLA filaments.

You can use the 3DE Premium on acrylic, glass, alu, PEI sheet, PC sheet, Kapton, 3M Tape and many other materials – with or without glue or other adhesive spray glue.

All the 3DE Premium spools are packed with 1kg of material and weigh around 1.4kg in total (with spool). All spools are vacuum packed with silica gel to avoid moisture which is a killer for all filaments.

3DE Premium comes in 1.75mm and 2.85mm to ensure that all normal types of 3dprinters can use our filament.

We ensure a perfect roundness and tight diameter control of the filament – ​​this will ensure that you will receive a good quality filament for your 3dprinter. 3DE Premium is the best selling 3dprinter filament in our store.

We are known all over the world for our low prices and high quality. We recommend 3DE Premium because;

* Very easy to print – even at a low temperature.

* A low warping filament

* It's eco-friendly

* No unpleasant smells or particles

MANUFACTURERS: 3DE PREMIUM

MATERIAL PLA

DIAMETER 1.75mm / 2.85mm

TOLERANCE ± 0.05 mm

HEATED BUILD PLATFORM REQUIRED: No

PRINT TEMPERATURE: 190°C - 210°C

WEIGHT FILAMENT: 1000 g

SPOOL SIZE: 200mm x 55mm

SPOOL HUB DIAMETER: 53 mm

På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret

Klik her og gå til dokumentation

Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.

Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.

Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.

Vil du vide mere om vores returregler, læs dem her

Vi ser frem til din ordre 😍