Fremragende | Baseret på 600+ anmeldelser
PrimaSelect PRO - PLA - White - 1.75mm - 750g
På lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
Basic info |
|
Material | PLA PRO |
Diameter | 1.75mm |
Tolerance | ± 0.05 mm |
Heated build platform required | Recommended 55°C ±10°C |
Print Temperature | 50mm Speed - 220°C ±10°C 120mm Speed - 240°C ±10°C |
Melting Temperature | 190 - 220°C |
Weight Filament | 750 g |
Spool Size | 200 x 55 mm |
Spool Hub Diameter | 53 mm |
Physical properties | ||
Description | Test method | Value |
Specific gravity | ISO 1183 | 1.27g/cc |
MFI 210°C / 2.16kg | ISO 1133 | 6 g/10 min* |
Tensile strength | ISO 527 | 39 MPa |
Elongation to break | ISO 527 | 58% |
Tensile modulus | ISO 527 | 3900 MPa |
Impact strength – Charpy notched 23°C | ISO 179 | 22 KkJ/m2 |
Thermal properties | ||
Description | Test method | Value |
Printing temp. | 50mm Speed - 220°C ±10°C 120mm Speed - 240°C ±10°C |
|
Printbed Temperature | Recommended 55°C ±10°C | |
Melting temp. | 190-220°C | |
Heat Deflection temp. (B) (after annealing) | ISO 75 | 95°C+ |
PrimaSelect™ PLA PRO is the next generation of high performance PLA for demanding industrial applications. Designed to be able to print fast >120mm/s so you can save on production time. Very high heat resistance (95°C+) after annealing. Excellent mechanical properties combined with a matte surface finish that helps conceal the printed layers for optimum appearance.
- Engineered for high print speeds >120mm/s which means that you cut down on your production time
- High Heat Resistance 95°C+ (after annealing) - perfect for demanding applications
- Easy to print with and extremely low shrinkage, dimensional accuracy, combined with excellent mechanical properties
- Nice matte surface finish that helps conceal the printed layers for optimal appearance
Print Faster
Print fast with PrimaSelect™ PLA PRO! Especially designed for printing fast >120mm/s. Increased printing speed means that you can cut down on your printing time and save valuable hours. When printing fast you need a print temperature set to 240°C ± 10°C to keep good flow.
More heat
Higher print temperature also means that our PLA PRO withstands more heat after your print is ready. Even more so if you post process your print by annealing it.
Annealing your print (Bake it!)
Make your print even better! To get even better strength and higher heat resistance you can anneal your print. This procedure means that you heat the printed part in your oven, preferably on a piece of aluminum sheet. Pre-heat the oven to 110°C and then bake the parts for 30 - 60 min. Turn off the oven and let it cool down to normal room temperature with the prints still in it. Take out your improved prints afterwards.
Normally filament shrinks (3 – 5%) during this process but with our formula we are down to about 0.27%.
Easy to print
As easy as ordinary PLA to print with. If you have a heated bed we recommend you set it to 55°C ±10°C. Sticks well to most print beds but as always some adhesive or special build plate is always good, we recommend BuildTak or a PEI sheet. When printing fast you need to use a higher temperature (120mm/s 240°C ±10°C) and when you go to lower speeds, a lower temperature is sufficient (around 50mms/s 220°C ±10°C)
Say goodbye to ABS
With PrimaSelect™ PLA PLA you get the advantages of ABS but you don't get the smell and shrinkage problems
Tekniske specifikationer
Brand
PrimaSelect
Vægt
1.0 kg
EAN
7340002102610
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Fragt bliver igennem 3D eksperten beregnet ud fra vægt og destination. Dette gælder udelukkende for pakker til Danmark. Grønland og Færøerne har særlige fragtpriser.
Kontakt os venligst herom for den mest fordelagtige løsning.
Vi leverer fortrinsvis med GLS på pakkeforsendelser og Post Danmark (Maxibrev) til småforsendelser uden tracking og forsikring.
3D Eksperten har variable fragtpriser. Disse priser udmåles automatisk i forhold til din ordrestørrelse/vægt og er tilpasset i henhold til GLS/Post Danmarks leveringspriser. Prisen kan variere fra 29,- til 400,-. ex. fragtforsikringer for særligt udsat gods.
Afhentning kan normalt godt ske fra vores virksomhed mellem kl. 08 og 14 på hverdage, men du SKAL skrive forinden. Det er ikke alle varer der findes på vores eget lager, men sendes direkte fra leverandørerne.
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30