1-2 dages levering
Gratis fragt over 399,-
40.000+ tilfredse kunder
Fremragende | Baseret på 600+ anmeldelser
PrimaCreator - PrimaFil PEI Ultem Sheet 500x500mm - 0.5mm
På lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
PrimaFil PEI Ultem Sheet 500x500mm - 0.2mm
PEI Ultem (Polyetherimide) from Prima Filaments is a reusable, relatively maintenance-free surface for all filament types.
No need for additional adhesives such as glue or tape. PEI appeals because of its "no-surface-prep" conditions, which makes it convenient to work with. In addition, printing on PEI requires no support as items adhere directly to the surface without any problems.
How to use PEI
PEI is easy to adjust in size with a hobby knife. Once you have laminated your PEI sheet onto your glass, simply align your build plate. Heat your build plate to 45°C, after which you are ready to 3D print. When the item is finished printing, let the build plate cool, and then you can carefully remove the item from the build plate.
Wipe your PEI surface with PrintaClean or isopropanol before each print to ensure you wipe away any grease or other residue. This helps greatly increase your surface adhesion.
PrimaFil PEI Ultem Sheet 500x500mm - 0.2mm
PEI Ultem (Polyetherimide) is a reusable, relatively maintenance-free surface for all filament types.
No need for additional adhesives such as glue or tape. PEI appeals because of its "no-surface-prep" conditions, which makes it convenient to work with. In addition, printing on PEI requires no support as items adhere directly to the surface without any problems.
Tekniske specifikationer
Brand
PrimaCreator
Vægt
0.1 kg
EAN
7340002110356
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.
Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.
Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.
Vil du vide mere om vores returregler, læs dem her
Vi ser frem til din ordre 😍
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30
PrimaCreator - PrimaFil PEI Ultem Sheet 500x500mm - 0.5mm
Du kiggede tidligere på
Se hvad vores kunder har skabt
