Fremragende | Baseret på 600+ anmeldelser
(DISCONTINUED) Primacreator Value Water Washable UV Resin - Skin - 500ml
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
When you want amazing results at a lower cost than many other brands - PrimaCreator VALUE resin should be your first choice!
The new water washable resin from PrimaCreator is the latest addition to the series and offers the same quality as the other resins. Unlike most other resins, the water-washable resin from PrimaCreator requires no chemicals to remove uncured material from the print. You simply rinse it in regular tap water and it comes out clean and ready to be cured. This is of course the best choice for both you and the environment. You can choose from several different colors at 3D Eksperten.
Resin from the VALUE line is a high-quality resin made from the best materials. Your 3D prints harden in sunlight or in a UV curing chamber. When curing is complete, the result is a solid print with very little shrinkage. The finished print has a solid color part with a beautiful semi matte surface with excellent details and smooth layer transitions. If you want a crystal-clear transparency, you must use the transparent resin, which is really fantastic.
VALUE resin has many advantages over other brands of comparable resins. The most noticeable thing is that it has limited odor.
VALUE resin is developed for low power DLP machines such as Wanhao Duplicator 7, SparkMaker, Anycubic Photon, Zortrax Inkspire and other printers that use UV light for curing. Optimized for UV light source 395 - 405 nm. Fast curing time, 4-8 seconds per layer for faster printing.
After printing, print in IPA (Isopropyl Alcohol) to rinse the rest of the extra resin that may be left.
Curing:
Depending on the 3D print, the curing times may vary:
- In a UV light curing chamber, it will take approx. 2-5 minutes
- In sunlight, 10-20 minutes
- In daylight on a cloudy day, it can take up to 60 minutes
Primacreator Value Water Washable UV Resin
Color: Skin
Quantity: 500ml
Flexural modulus:1.882-2.385Mpa: | Elongation at break:4-10% |
Flexural strength :40-58MPa | Hardness(Shore D):85-88 D |
Hot deformation temp.:80℃ | Glass transition temp.:100℃ |
Thermal expansion:95*E-6 | Density:1.05—1.25 g/cm3 |
Volume shrinkage:3.35%-4.24% | Notched impact strength:41-48j/m |
Linear shrinkage:1.05-1.35% | Viscosity:100-350MPa·s |
Tensile strength:30-52MPa | |
Tensile modulus:1,779—2,385 MPa |
Tekniske specifikationer
Brand
PrimaCreator
Vægt
0.7 kg
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.
Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.
Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.
Vil du vide mere om vores returregler, læs dem her
Vi ser frem til din ordre 😍
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30