PrimaCreator RepRap M6 / V6 - Ruby Nozzle 0.6 mm - 1 pcs

PrimaCreator RepRap M6

All filaments - one nozzle

Why do I need a ruby ​​nozzle?

*Extreme durability

*Perfect for very abrasive filaments such as carbon, glow in dark, fiberglass, metal, wood.

*Perfect diameter without sharp edges gives a better print quality

RepRap M6 Ruby Nozzle 0.6 mm

Fits: Prusa i3MK2/MK3, E3D V5-V6, Formbot Raptor

The PrimaCreator Ruby Nozzle is the newest addition to the PrimaCreator nozzles. A regular brass nozzle is often recommended as they have superior conductivity when it comes to heat. However, a brass nozzle has its disadvantages! If you want to print with an abrasive material such as carbon or glow in dark, an ordinary brass nozzle will wear down in a very short time. Therefore, you can choose to use a hardened steel nozzle, it will not wear out as quickly as a brass nozzle. However, steel as a material is not optimized to be used as an "everyday nozzle" due to its thermal conductivity not being as good as in a brass nozzle. The most logical solution would be to have the best of both worlds.

PrimaCreator Ruby Nozzle

In the best nozzle we have ever produced, we have the same high quality brass as in our regular nozzles, but in addition to this we have also added a small ruby ​​gem at the tip of the nozzle. This turns a regular brass die into a die you can use with your standard filament like PLA, ABS, PETG and so on to the more abrasive ones like filled filament with metal, glow in dark, wood and other similar types of filament.

Finally, you can use one nozzle for all your materials

All ruby ​​nozzles from PrimaCreator are made of the best high-quality brass with real ruby ​​tips. They are finished in a state-of-the-art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface, while extrusion of course results in better prints.

For best results and optimal printing, we recommend that you re-level your build platform after switching to a new nozzle. Note that a Prima Creator nozzle may be compatible with your printer, but the distance between the nozzle and the build plate must be adjusted.

The process of producing the Prima Creator nozzles begins with a selected, high-quality material. When the material reaches the factory, an optical inspection is first made of the material to be used for each batch of nozzles. The material is then shaped. This process is only done once with PrimaCreator nozzles, in many other (cheaper) cases this process has to be repeated several times, often as many as 3-4 times, and still you will not get the same results.

På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret

Klik her og gå til dokumentation

Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.

Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.

Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.

Vil du vide mere om vores returregler, læs dem her

Vi ser frem til din ordre 😍