Fremragende | Baseret på 600+ anmeldelser
PrimaCreator - FlexPlate - Powder Coated PEI 235x235mm
Kun 1 på lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
Flexplate-Powder Coated PEI is the perfect surface to print on, it is very durable and easy to handle. And best of all, thanks to the flexible plate, your prints are very easy to remove. Just give it a little bend and the print will pop right off.
Why should I use PrimaCreator FlexPlate-Powder Coated PEI?
PrimaCreator FlexPlate-Powder Coated PEI
The new powder-coated FlexPlate from PrimaCreator consists of three parts. The first is the magnetic surface that you need to attach to the printer seat. The second and third parts are the high-quality spring steel plate, which is covered with a plate of the best PEI Ultem.
Flexplate-Powder Coated PEI is the perfect surface to print on, it is very durable and easy to handle. And best of all, thanks to the flexible plate, your prints are very easy to remove. Just give it a little bend and the print will pop right off.
PrimaCreator FlexPlate-Powder Coated PEI is based on a ferrite core, which is much more heat resistant than neodymium magnets. This FlexPlate can easily withstand temperatures of up to 130 °C, so you can even use it with ABS.Flexplate-Powder Coated PEI is the perfect surface to print on, it is very durable and easy to handle. And best of all, thanks to the flexible plate, your prints are very easy to remove. Just give it a little bend and the print will pop right off.
Why should I use PrimaCreator FlexPlate-Powder Coated PEI?PEI Ultem (Polyetherimide) from PrimaCreator is a reusable, relatively maintenance-free build surface for both ABS (with heated bed) and PLA (hot or cold), but other materials such as metal, wood, PETG, ABS+ and many others also work fine. You do not need additional adhesives such as glue or tape. PEI is appealing because of its "no-surface-prep" ratio, which makes it convenient to work with. Furthermore, printing on PEI requires no support rafts as the parts adhere directly to the surface without any problems.
How to use it.
Unpack your FlexPlate, attach the magnetic surface to the print seat, then attach the spring steel plate with the PEI to the magnetic surface. Remove the protective film from the PEI and re-level your print bed. You are now ready to print loose. Parts should detach from the surface with almost no problems. PLA does not require heat, but it helps to turn the heated bed up to 45C. You don't need any adhesive, but if you need to print something large or for a long time, we recommend using the PrimaFix adhesive, it will make your parts stick even better and release even easier when the print is finished. When the print is complete, simply let the plate cool, remove the plate and give it a slight bend. You can then just "pop" the model off the plate.Before each print, wipe your PEI surface with 70-91% isopropyl alcohol to ensure you wipe away any grease or other residue that may have accumulated on the surface . This will help increase your surface adhesion significantly. Use acetone, isopropyl alcohol, methyl alcohol or soap to clean your PEI after use.
Tekniske specifikationer
Brand
PrimaCreator
Bruttovægt
0.4 kg
EAN
7340002117874
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.
Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.
Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.
Vil du vide mere om vores returregler, læs dem her
Vi ser frem til din ordre 😍

Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30

PrimaCreator - FlexPlate - Powder Coated PEI 235x235mm
Du kiggede tidligere på
Se hvad vores kunder har skabt

Brian
96 lysfiber holdere med fingerskrue til en rum udstilling

Christian
Holger Danske

Frank
Star wars. Han solo blaster, en gave til min far i farsdag gave.

Freddy
Det er flaskeholdere jeg selv har printet i PLA filament

Glen
Pc kabinet designet som middelalder kro

Helge
Ukulele

John
Japansk havelampe

Jonas
3D printed drage som lige er strikket.

Jonas WP
DM screen

Kasper
Funktionel elguitar Les Paul-style med ST hardware

Kim
En figur af Bruce Willis fra Die Hard

Louis
En headset holder

Malthe
Har printet en daredevil maske med røde led øjne der kan lyse op, og er igen med at lave daredevils Billy clubs som virker

Marianne
Kortholder samt boks til uno kort

Michael

Trine
Drage kranier efter eget design