Fremragende | Baseret på 600+ anmeldelser
Phaetus - APUS - Extruder
På lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
APUS extruder from Phaeatus
A 155g lightweight metal design with a Nema 14 stepper motor gives the extruder a perfect balance between hardness and weight. The aluminum frame improves the heat dissipation of the Nema 14 stepper motor.
Specifications
- 155g lightweight all metal design
- Optimized RNC Dual Drive Gears
- Universal Hotend mounting system
- Stable high-speed printout
- Optimized RNC Dual Drive Gears
The APUS extruder has a gear ratio of 6.3/1 and the gears have a co-prime number of teeth for an optimal gear design. The teeth of the Dual Drive gear system were optimized to perfectly grip all kinds of filaments and are RNC hardened. This hardening process increases wear resistance and gives the Dual Drive gears a polished surface. A tightly constricted filament path makes the extruder more reactive and as such ensures that the extrusion process is as consistent as possible. By using the manual wheel, the user can easily load and unload the filament without having to rely on a Gcode loading and unloading macros.
Universal hotend mounting system
In the modern 3D printing era, high-speed printing is becoming more and more important. Therefore, the APUS extruder is designed in such a way that the center of mass is as close as possible to the mounting system, even when a hotend is installed. This ensures that the torque acting on the mounting system is small. The extruder uses the "three-screw system": two screws to remove the hotend and one screw to loosen the idler. With this, the user has full access to the filament path. This system also allows hotends to be “hot-swapped” conveniently. This "quick swap system" is 3D printable and can therefore be redesigned to fit any type of hotend.
Tekniske specifikationer
Brand
Phaetus
Vægt
0.1 kg
EAN
6973090162917
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Fragt bliver igennem 3D eksperten beregnet ud fra vægt og destination. Dette gælder udelukkende for pakker til Danmark. Grønland og Færøerne har særlige fragtpriser.
Kontakt os venligst herom for den mest fordelagtige løsning.
Vi leverer fortrinsvis med GLS på pakkeforsendelser og Post Danmark (Maxibrev) til småforsendelser uden tracking og forsikring.
3D Eksperten har variable fragtpriser. Disse priser udmåles automatisk i forhold til din ordrestørrelse/vægt og er tilpasset i henhold til GLS/Post Danmarks leveringspriser. Prisen kan variere fra 29,- til 400,-. ex. fragtforsikringer for særligt udsat gods.
Afhentning kan normalt godt ske fra vores virksomhed mellem kl. 08 og 14 på hverdage, men du SKAL skrive forinden. Det er ikke alle varer der findes på vores eget lager, men sendes direkte fra leverandørerne.
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30