NinjaFlex Filament - Snow White - 1.75mm - 1kg

NinjaFlex Filament - 1.75mm

Weight: 1kg

Color: Snow White

Open up a world of possibilities limited only by your imagination. NinjaFlex, a breakthrough filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that provides flexible prints with elastic properties. Patent-pending technology provides smooth feed and clean, high-quality printed parts.

NinjaFlex's unique flexibility and smooth feed characteristics allow you to create in ways you never thought possible.

Best suited for:

• Fused Deposition 3D printers that use 1.75mm or 3mm filament.

• 3D printers that accept other types of filaments such as ABS and PLA

• Filament shore hardness of approx. 85A

• Consistent diameter and material properties provide reliable, high-quality prints

• Patent-pending technology provides smooth propulsion

• Low tack, low CoF outer material provides smooth feed through wire guides

• High elasticity and excellent wear resistance

• Excellent adhesion and bonding between the layers of the building platform

• Complies with REACH and RoHS Directive 2002/95/EC

• Recommended extruder temperature: 210 - 225 °C

• Recommended temperature on the platform: 30 - 40°C

Frequently asked questions:

What type of extruders work with NinjaFlex?

Extruders that use a spring loaded roller bearing to create pressure against the extruder drive gear. Because of its flexibility, the filament must also be supported between the outlet of the drive wheel and the entrance to the melting chamber.

Is it necessary to coat the building platform with Kapton® tape or hairspray?

NinjaFlex adheres well to most surfaces (including aluminum and glass), so it is not necessary to surface treat the building platform. Kapton tape can be used with NinjaFlex, but the printed part may be stronger on the tape than the adhesive that holds the tape to the build platform.

Does NinjaFlex pass well through plastic pipes?

NinjaFlex's low friction surface is formulated to reduce surface sticking and make it easier for the filament to be fed in, but it may be beneficial to use PTFE guide tubes to further reduce drag at the extruder.

Is NinjaFlex approved for contact with food?

Although NinjaFlex does not contain BPA or other toxins, it is not recommended for food contact applications.

Are there special printer settings that need to be adjusted for NinjaFlex?

NinjaFlex generally works well with the same extruder settings as ABS, but by adjusting the printer's retraction settings you can improve the stop/start print quality.

Do you have other tips for using NinjaFlex?

When switching from a different polymer (eg ABS or PLA), clean thoroughly before starting a print. As with other materials, when preheating, use a lower temperature (~180-200°C) to prevent excess material from escaping before starting a print.

Are there any safety concerns or considerations when using NinjaFlex?

NinjaFlex must be used in a well-ventilated area according to the recommended operating conditions. TPE products may release small amounts of smoke at high temperatures. Although these vapors are generally considered tolerable and less harmful than ABS, care should be taken to minimize exposure, especially among sensitive individuals.

På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret

Klik her og gå til dokumentation

Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.

Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.

Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.

Vil du vide mere om vores returregler, læs dem her

Vi ser frem til din ordre 😍