Monocure 3D - Rapid Resin - Gunmetal Grey - 1L

Resin that fits any UV LED, DLP and SLA-3D printer.

*Brand: Monocure

*Colour: Gunmetal Grey

*Quantity: 1lL

Monocure Rapid 3D Resin is of high quality at low cost for your UV-LED, DLP and SLA-3D printer.

With Monocure purchased from your 3D printer specialist 3D Eksperten, you can create highly detailed objects with good surface quality, high precision and excellent accuracy. The high quality Monocure Rapid 3D resin is designed and optimized for 3D printing with LED UV, DLP and SLA 3D printers. Thanks to the wide polymerization range from 225 to 420 nanometers, it can be processed on a variety of UV-LED, DLP and SLA 3D printers.

Material properties of Monocure Rapid Resin:

*Use it together with your UV LED, DLP and SLA-3D printer

*It can be used with many different brands and devices as the UV technology is very similar.

*High polymerization rate (curing rate)

*Wide range of colors

*Optimized for high resolution and precise components

*Low material shrinkage of 0.5%.

*Shore value: hardness D 70

*Insignificant odor compared to other resins

*Examples of resin printers that can use Monocure Rapid 3D resin as 3D The expert is also a dealer of can be Anycubic Photon, Wanhao D7 & D8, Creality LD-001 and other DLP-3D printers

These are possible areas of use for Monocure 3D Rapid Resin:

*Research and development

*Prototyping and prototype construction for research and development

*Components for mechanical engineering and industrial use

*Medicine models & applications

*Models for architecture & design

*You can also use Monocure 3D Rapid Resin for other applications

*Wide width of polymerization and reaction ranges - 225 nm to 420 nm wavelength

Monocure Rapid 3D resin is characterized by its wide spectrum of polymerization interval and the wide spectrum of reactivity. This inexpensive, high-quality resin cures at UV wavelengths of 225 to 420 nm. The UV light triggers the photopolymerization process, which then starts. During this chemical reaction, the liquid resin becomes solid and hard due to the energy input from UV light. You can buy several different types of UV stations from the 3D expert.

Photoinitiators, monomers and sensitizers for a rapid polymerization process by UV light in a broad spectrum

By combining a mixture of photoinitiators, monomers and sensitizers, virtually any UV light source can initiate the polymerization process of Monocure Rapid 3D resin. If you wish, you can paint the 3D printed parts after you have cured them, for example by placing them in a UV post-curing chamber or in sunlight. After complete curing, for example, you can process Monocure 3D Rapid Resin components and paint them. The applied paint keeps your object protected from sunlight. This ensures that a component manufactured from Monocure 3D Rapid Resin additively remains stable and durable for a longer period of time.

Tips for cleaning Monocure Rapid 3D resin

*Use Isopropanol and a UV curing chamber

After 3D printing, clean the objects with your UV LED, DLP or SLA-3D printer by placing them in an isopropanol bath for approximately 10 minutes. This washes liquid, unpolymerized material from the component. This allows you to improve the surface quality and reveal fine details cleanly. After cleaning, allow the parts to dry and then place them in a UV curing chamber.

Other resin properties:

*Monocure Rapid 3D resin is tested with a "Shore D hardness thermometer" and has a value of 70 (for comparison, a safety helmet has a hardness of 80).

*The viscosity of this resin is 500-600 cps at 25°C (with Brookfield RVT)

*All our resins are odorless, have no VOC emissions and show very low material shrinkage properties <0.5%>

*We recommend that you store your Monocure 3D Rapid Resin in a dark, cool place out of direct sunlight

*If you like to work with a high quality resin on your DLP or SLA 3D printer, buy Monocure Rapid 3D resin.

*Buy Monocure Rapid 3D resin and you will get high quality resin for your UV LED, DLP and SLA 3D printers.

PHYSICAL PROPERTIES

Colour	Clear appearance
Viscosity	500 - 600cps @ 25°C (Brookfield RVT)
Odour	Negligible Characteristics
Shelf Life	12 months
Active Solids	100%
UV Cure	225nm to 420nm
Cure Speed	Fixed with UV LED LAMPS
Storage	Dark Cool, dry place out of direct sunlight.
Wash Up	IPA (Isopropyl Alcohol)

-----

Monocure Rapid 3D Resin – High quality good-value resin for your UV-LED, DLP and SLA-3D printer

Create highly detailed objects with good surface quality, high precession and excellent accuracy with this good-value resin for your DLP or SLA-3D printer. The high-quality Monocure Rapid 3D resin is designed and optimized for 3D printing with LED UV, DLP and SLA-3D printers. Thanks to its wide polymerization range from 225 to 420 nanometers, it can be processed on a variety of UV LED, DLP and SLA-3D printers.

Material properties of Monocure Rapid Resin:

• Use it with your UV LED, DLP & SLA-3D printer
• It can be used with many different brands and devices as the UV technology is very similar.
• High polymerization speed (curing speed)
• Wide range of colours
• Optimized for high-resolution and precise components
• Low material shrinkage of 0.5%.
• Shore hardness D 70
• Negligible odor compared to other resins/resins

These 3D printers allow you to process Monocure Rapid 3D Resin – for example on your Anycubic Photon, Wanhao D7 & D8, Creality LD-001 and other DLP-3D printers

For example, you can process this resin with your Wanhao Duplicator D7 or Duplicator 8, Anycubic Photon and Creality LD-001. Since almost all UV LED or DLP 3D printers use similar 3D printing technology, you can also use and process this resin on other 3D printers from different manufacturers.

These are possible areas of application for Monocure 3D Rapid Resin:

• Research and development
• Prototyping and prototype construction for research and development
• Components for mechanical engineering and industrial usage
• Medicine models & applications
• Models for architecture & design
• You can also use Monocure 3D Rapid Resin for other applications as well

Wide range of polymerization and reaction ranges – 225 nm to 420 nm wavelength

Monocure Rapid 3D resin is characterized by its wide range of polymerization range and wide reactivity spectrum. This inexpensive and high-quality resin cures at UV wavelengths of 225 to 420 nm. The UV light triggers the photopolymerization process, which then starts. During this chemical reaction, the liquid resin becomes solid and hard due to the energy input of UV light.

Photoinitiators, monomers and sensitizers for a fast polymerization process by UV light in a wide spectrum

By combining a mixture of photoinitiators, monomers and sensitizers, virtually any UV light source can initiate the polymerization process of Monocure Rapid 3D resin. If you wish, you can paint the 3D-printed parts after you have cured them, for example by placing them in a UV post-curing chamber or in sunlight. After complete curing, you can further process Monocure 3D Rapid Resin components and paint them, for example. The applied paint keeps your object protected from sunlight. This ensures that a component made of Monocure 3D Rapid Resin additively remains stable and durable for a longer period of time.

Tips for Cleaning Monocure Rapid 3D Resin – Use Isopropanol and a UV Curing Chamber

After 3D printing, clean the objects with your UV LED, DLP or SLA-3D printer by placing them in an isopropanol bath for about 10 minutes. This washes off liquid, unpolymerized material from the component. This allows you to improve surface quality and reveal fine details cleanly. After cleaning, let the parts dry and then place them in a UV curing chamber to cure your resin 3D prints.

Other resin properties:

• Monocure Rapid 3D resin has been tested with a "Shore D hardness durometer" and has a value of 70 (for comparison a safety helmet has a hardness of 80).
• The viscosity of this resin is 500-600 cps at 25 ° C (with Brookfield RVT)
• All our resins are odorless, have no VOC emissions and show very low material shrinkage properties <0.5%>
• We recommend that you store your Monocure 3D Rapid Resin in a dark, cool place without direct sunlight
• If you like to work with a high quality resin on your DLP or SLA-3D printer, you should buy the Monocure Rapid 3D resin

Buy the Monocure Rapid 3D resin and you'll get high quality resin for your UV LED, DLP and SLA-3D printers.

PHYSICAL PROPERTIES

Colour	Clear appearance
Viscosity	500 - 600cps @ 25°C (Brookfield RVT)
Odour	Negligible Characteristics
Shelf Life	12 months
Active Solids	100%
UV Cure	225nm to 420nm
Cure Speed	Fixed with UV LED LAMPS
Storage	Dark Cool, dry place out of direct sunlight.
Wash Up	IPA (Isopropyl Alcohol)

På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret

Klik her og gå til dokumentation

Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.

Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.

Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.

Vil du vide mere om vores returregler, læs dem her

Vi ser frem til din ordre 😍