3DE All Metal Hotend Upgrade Kit (Steel)

Upgrade your MK10 extruder to an All Metal hotend and get rid of the problems that may arise with the old PTFE insert.

This kit includes tube and 0.40mm stell/brass nozzle - depending on the selected model.

Day to day delivery.

There is a nice little installation video below the description in this product that can be installed on your MK10 hotend in a few minutes.

This is an all metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle.

Thermal barrier tube is made from 2 different materials. The lower thermal heat break is made from stainless steel, and the colder upper part is made from aluminium. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a much better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upwards creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn't have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation occurs around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. Kit includes 1 nozzle and 1 thermal tube.

Install video for Wanhao Duplicator I3 series

Install video for Wanhao Duplicator 4 series

På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret

Klik her og gå til dokumentation

Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.

Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.

Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.

Vil du vide mere om vores returregler, læs dem her

Vi ser frem til din ordre 😍