Fremragende | Baseret på 600+ anmeldelser
3DE MAX - Shadow Gray - 1.75mm
På lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
* Brand: 3DE Premium
* Material: MAX
* Color: Shadow Grey
* RAL: 7015
* Diameter: 1.75mm
* Weight: 1 kg
NOTE: Slate gray changes name to Shadow Gray - but keeps the same color code.
3DE Max is a new material known for its extreme strength
3DE Max PLA is a 3D printer material which has great mechanical advantages and print quality. 3DE MAX has an impact resistance of up to 7 times better than ordinary PLA and better mechanical advantages than ABS and PETG.
Strength is a priority: Regular PLA is a rather brittle material, greatly limiting its range of applications. 3DE MAX PLA has been developed to change this. 3DE MAX PLA has an increased impact strength of up to 9 times compared to regular PLA and is 20% harder than ABS, and is therefore a sure winner when it comes to strength. So if you are looking for a material that can withstand your mechanically demanding tasks, 3DE MAX is ready for the challenge.
High quality: The high mechanical strength of 3DE MAX is achieved without compromise in print quality. In addition, 3DE MAX is also produced with Jam-Free technology.
With 3DE MAX, you can be sure to get high quality parts with excellent strength while still enjoying the ease of printing PLA.
An alternative to ABS: Still printing in ABS while trying to endure the smell and potential health risk? With 3DE MAX you can get rid of the potentially dangerous ABS and still achieve the same structural strength with even more benefits such as better printer compatibility, easier printing, less warping, no dangerous smell and in many cases even better mechanical properties - although not as flexible as ABS. If you need the flexibility of ABS, we recommend you take a closer look at 3DE PETG Materials.
The material properties
Glass Transition Temp
~ 60°C
Density
1.17 – 1.24 g/cm3
Diameters
1.75 mm or 2.85 mm
Tolerance
± 0.05 mm
50 Microns
(Typical~ ± 0.02 mm)
---
Recommended temperature for 3D printing
* 190–220°C (Diameter of 1.75mm)
Recommended 3D print speed
* 40 – 150 mm/s
Recommended heated building plate temperatures:
* Not required - but recommended
Build platform
All of our products work well with common building board surfaces such as Kapton tape, glass, etc. However, for the best user experience, we recommend using our materials with a SpiderSpringSteel System, or Spidersheets which is a build sheet surface designed specifically for desktop FDM / FFF printers.
See the full selection of 3d filament
Tekniske specifikationer
Brand
3DE Premium
Filamenttype
PLA
Diameter
1.75 mm
Tolerance
±0.05 mm
Vægt
1.2 kg
Ydre diameter på spolen
200x68 mm
Huldiameter
53 mm
Spolens materiale
Pap
EAN
5711336018243
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Fragt bliver igennem 3D eksperten beregnet ud fra vægt og destination. Dette gælder udelukkende for pakker til Danmark. Grønland og Færøerne har særlige fragtpriser.
Kontakt os venligst herom for den mest fordelagtige løsning.
Vi leverer fortrinsvis med GLS på pakkeforsendelser og Post Danmark (Maxibrev) til småforsendelser uden tracking og forsikring.
3D Eksperten har variable fragtpriser. Disse priser udmåles automatisk i forhold til din ordrestørrelse/vægt og er tilpasset i henhold til GLS/Post Danmarks leveringspriser. Prisen kan variere fra 29,- til 400,-. ex. fragtforsikringer for særligt udsat gods.
Afhentning kan normalt godt ske fra vores virksomhed mellem kl. 08 og 14 på hverdage, men du SKAL skrive forinden. Det er ikke alle varer der findes på vores eget lager, men sendes direkte fra leverandørerne.
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30