Fremragende | Baseret på 600+ anmeldelser
3DE MAX - Grass Green - 1.75mm
På lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
* Brand: 3DE Premium
* Material: MAX
* Color: Grass Green
* Pantone: 15-0332 TCX
* Diameter: 1.75mm
* Weight: 1 kg
3DE Max is a material known for its extreme strength
3DE Max PLA is a 3D printer material which has great mechanical advantages and print quality. 3DE MAX has an impact strength of up to 7 times better than ordinary PLA and better mechanical advantages than ABS and PETG.
Strength is a priority: Regular PLA is a rather brittle material, greatly limiting its range of applications. 3DE MAX PLA has been developed to change this. 3DE MAX PLA has an increased impact strength of up to 9 times compared to regular PLA and is 20% harder than ABS, and is therefore a sure winner when it comes to strength. So if you are looking for a material that can withstand your mechanically demanding tasks, 3DE MAX is ready for the challenge.
High quality: The high mechanical strength of 3DE MAX is achieved without compromise in print quality. In addition, 3DE MAX is also produced with Jam-Free technology.
With 3DE MAX, you can be sure to get high quality parts with excellent strength while still enjoying the ease of printing PLA.
An alternative to ABS: Still printing in ABS while trying to endure the smell and potential health risk? With 3DE MAX you can get rid of the potentially dangerous ABS and still achieve the same structural strength with even more benefits such as better printer compatibility, easier printing, less warping, no dangerous smell and in many cases even better mechanical properties - although not as flexible as ABS. If you need the flexibility of ABS, we recommend you look into 3DE PETG Materials.
The material properties
Glass Transition Temp
~ 60 °C
Density
1.17 – 1.24 g/cm3
Diameter
1.75 mm or 2.85 mm
Tolerance
± 0.05 mm
50 Microns
(Typical~ ± 0.02 mm )
---
Recommended print temperature
* 190–220°C (Diameter 1.75mm)
Recommended print speed
* 40 – 150mm/s
Recommended heated building plate temperatures:
* Not required - but recommended
Building plate
All of our products work well with common building board surfaces such as Kapton tape, glass, etc. However, for the best user experience, the 3D Expert recommends using our materials with a SpiderSpringSteel System, or Spidersheets which is a surface designed specifically for desktop FDM/FFF printers.
See our full selection of filament
Tekniske specifikationer
Brand
3DE Premium
Filamenttype
PLA
Diameter
1.75 mm
Tolerance
±0.05 mm
Vægt
1.2 kg
Ydre diameter på spolen
200x68 mm
Huldiameter
53 mm
Spolens materiale
Pap
EAN
5711336018298
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.
Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.
Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.
Vil du vide mere om vores returregler, læs dem her
Vi ser frem til din ordre 😍
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30