Fremragende | Baseret på 600+ anmeldelser
PrimaCreator Value UV-DLP Resin - White - 500ml
På lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
When you want good results for less expenditure, you should choose PrimaCreator VALUE resin!
Resin from the VALUE line is a high-quality resin made from the best materials. Your 3D prints harden in sunlight or in a UV curing chamber. When curing is complete, the result is a solid print with very little shrinkage. The finished print has a solid color part with a beautiful semi matte surface with excellent details and smooth layer transitions. If you want crystal-clear transparency, you must use the transparent resin, which is truly fantastic.
VALUE resin has many advantages over other brands of comparable resins. The most noticeable thing is that it has limited smell.
VALUE resin is developed for low power DLP machines such as Wanhao Duplicator 7, SparkMaker, Anycubic Photon, Zortrax Inkspire and other printers that use UV light for curing. Optimized for UV light source 395 - 405 nm. Fast curing time, 4-8 seconds per layer for faster printing.
After printing, you must print in IPA (Isopropyl Alcohol) to rinse off the rest of the extra resin that may be left.
Hardening:
Depending on the 3D print, the curing times may vary:
- In a UV light curing chamber, it will take approx. 2-5 minutes
- In sunlight, 10-20 minutes
- In daylight on a cloudy day, it can take up to 60 minutes
Primacreator Value UV/DLP Resin
Color: White
Quantity: 500ml
UV Light Source Wavelength: | 395 - 405 nm (optimal) |
Viscosity: | 100-150 (25℃ m.pa.s) |
Density: | 1.05 - 1.13g/cm³ |
Hardness | 85-88 Shore D |
Tensile strength: | 42.0 Mpa |
Flexural Strength: | 60 Mpa |
Elongation at break: | 10% |
Storage temperature | 5 - 40℃ |
Tekniske specifikationer
Brand
PrimaCreator
Vægt
0.8 kg
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Fragt bliver igennem 3D eksperten beregnet ud fra vægt og destination. Dette gælder udelukkende for pakker til Danmark. Grønland og Færøerne har særlige fragtpriser.
Kontakt os venligst herom for den mest fordelagtige løsning.
Vi leverer fortrinsvis med GLS på pakkeforsendelser og Post Danmark (Maxibrev) til småforsendelser uden tracking og forsikring.
3D Eksperten har variable fragtpriser. Disse priser udmåles automatisk i forhold til din ordrestørrelse/vægt og er tilpasset i henhold til GLS/Post Danmarks leveringspriser. Prisen kan variere fra 29,- til 400,-. ex. fragtforsikringer for særligt udsat gods.
Afhentning kan normalt godt ske fra vores virksomhed mellem kl. 08 og 14 på hverdage, men du SKAL skrive forinden. Det er ikke alle varer der findes på vores eget lager, men sendes direkte fra leverandørerne.
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30