Anycubic Resin - White - 1L

Professional LCD resin from Anycubic has a higher print efficiency than other compatible LCD resins on the market. The resin is only designed for LCD models and not recommended for DLP or SLA machines.
The resin solidifies quickly and ensures the strength of cast parts. The material is stiff and hard, which makes for a strong material. It does not shrink much, has a shorter curing time and generally works really effectively for LCD machines. The models have a strong adhesion during printing and are at the same time easy to remove again.

The resin is stable under different climatic conditions and is also easy to store.

Resin from Anycubic is perfect for your Anycubic resin printer.

*Brand: Anycubic

*Quantity: 1 litre

*Colour Black

Resin from Anycubic perfect for your Anycubic resin printer

*Brand: Anycubic

*Quantity: 1 litre

*Colour: Choose between black or white

*Exposure parameters: Exposure time(s) at the bottom 20-60s, normal exposure time(s) 5-15s.

Precautions and use:

*Keep away from light seals at room temperature. (Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).

*It is recommended to store at 15℃-35℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, which hardens light-sensitive resin.

*Shake well before use. Avoid using resin in places where there is a lot of sunlight.

*Use gloves before use to avoid direct contact with the skin and keep the room ventilated.

*If accidental contact with the skin occurs, plenty of water must be used. If you feel unwell, you must seek timely medical attention.

*To clean the printed models, use high concentration alcohol to clean the model (recommended concentration of 95% or more, the higher the better).

*The resin has a shelf life of up to 18 months

ANYCUBIC resin is best suited for Photon / Photon S 3D printer.

På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret

Klik her og gå til dokumentation

Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.

Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.

Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.

Vil du vide mere om vores returregler, læs dem her

Vi ser frem til din ordre 😍