Fremragende | Baseret på 600+ anmeldelser
310x320mm - SpiderFlexiPlate System (Ex Creality CR10 S3 PRO, Creality CRX)
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
So Spider has come up with a SpiderFlexiPlate System! Are you tired of not being able to get your project out of building board, and would you like to have an even surface to print on? Then the SpiderFlexiPlate System is the answer! You get a uniform and straight surface because the base plate is made of metal and then the surface of the SpiderFlexiPlate System is made of magnet, on which the well-known SpiderSheet is mounted, so you are sure that your enme is stuck during printing.
- Your print will have good adhesion!
- Your print is easy to remove again!
- Easy to assemble and disassemble.
So Spider has come up with a SpiderFlexiPlate System! If you are tired of not being able to get your project from building board, then the SpiderFlexiPlate System is the answer! You get a uniform and straight surface because the base plate is made of metal and the surface is a magnet with a SpiderSheet attached. When removing the workpiece, be sure to let your build plate cool completely before removing your workpiece using the SpiderFlexiPlate System.
Easy mounting and dismounting! The underside is a thin metal plate with a glue sheet. The glue sheet must be peeled off and then placed on your building board. The surface of the SpiderFlexiPlate System is a magnetic plate on which the well-known and very popular SpiderSheet is mounted. This magnetic plate will easily adhere to the metal plate. Then it's just a matter of starting your print. In this way, you are sure that your subject is stuck during printing and that the subject is easy to remove afterwards.
Do burg of isopropyl alcohol or window/glass cleaner when cleaning your SpiderSheet. Take good care of your surface and do not drive the nozzle too close. In case of damage or lack of cleaning, a new FlexiPlate with SpiderSheet will be required.
Tekniske specifikationer
Brand
Spider
Vægt
0.5 kg
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Fragt bliver igennem 3D eksperten beregnet ud fra vægt og destination. Dette gælder udelukkende for pakker til Danmark. Grønland og Færøerne har særlige fragtpriser.
Kontakt os venligst herom for den mest fordelagtige løsning.
Vi leverer fortrinsvis med GLS på pakkeforsendelser og Post Danmark (Maxibrev) til småforsendelser uden tracking og forsikring.
3D Eksperten har variable fragtpriser. Disse priser udmåles automatisk i forhold til din ordrestørrelse/vægt og er tilpasset i henhold til GLS/Post Danmarks leveringspriser. Prisen kan variere fra 29,- til 400,-. ex. fragtforsikringer for særligt udsat gods.
Afhentning kan normalt godt ske fra vores virksomhed mellem kl. 08 og 14 på hverdage, men du SKAL skrive forinden. Det er ikke alle varer der findes på vores eget lager, men sendes direkte fra leverandørerne.
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30