Fremragende | Baseret på 600+ anmeldelser
NextDent - UV Box TM LC-3DPrint
Kun 1 på lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
V.1. 2015.08 NextDent TM LC-3DPrint Box
NextDent TM LC- 3D Print Box Instructions for use
User's Instruction Manual
1
1.0 General precautions:
- Read this manual carefully before use.
- This machine should be used by professionals only. - The built-in safety mechanism should not be
removed or modified.
- Do not allow unauthorized persons to repair the
machine.
- Do not use this machine for any other kind of
material than NextDent 3D printing Materials.
1.1 Safety warning label information:
- Do not touch live electrical parts.
-
- Turn off the power source and disconnect
power cable before installing or
servicing the equipment.
-
- Turn off the equipment when not in
use.
- Do not use worn and damaged cables.
- Use only well-maintained equipment.
-
- Do not handle the power cable with wet
hands.
- Keep children away.
-
- Always turn off the machine before cleaning
- do not open the lid when the machine is in use.
- do not cover the fan at the back.
- Only use the machine with NextDent3D printing Materials.
- Do not touch the cover during operation (this cover warms up)
User's Instruction Manual
2.0 Check the package contents:
- NextDent LC-3D Print Box
- AC Power cable
- 6pcs of 18W lamps-71color - 6pcs of 18W lamps-78 color - Inside metal grid
- User's Instruction Manual - Electric diagram
- Declaration of conformity - Warranty conditions
2.1 Prepare the area where the NextDent LC-3D Print BOX will stand:
- The surface should be flat and dust free.
- Make sure there is enough space on all sides.
2.2 Steps for installation:
- Connect all the lamps (12pcs) to all the lamp sockets which are placed in the cover and the chamber.
- Connect the power cable to the power socket.
2
V.1. 2015.08
NextDent TM LC-3DPrint Box
3.0 Description of the back side of the machine
3.1 Fan
The machine is equipped with a fan on the back to cool down the inside and maintain
the proper temperature inside the machine.
The fan operates when the machine is in use.
- The fan will continue cooling for 10 minutes if
the machine was running longer than 10 minutes -Fan operates in case the temperature inside
the machine is above 33 °C.
3.2 AC power cable
3.3 Identification label
3.4 Fuse Box and AC power cable socket
User's Instruction Manual
4.0 Description of the front panel
4.1 Description of function keys
4.2 Description of the inside
3
- Increasing button Button for increasing operation time |
|
- Decreasing button Button for decreasing the operation time |
|
- Start/Stop button Start/Stop button for starting and stopping operation. - Program button Program button for choosing the pre-set programs. (pre-set programs are: 0,10,20 and 30min) |
V.1. 2015.08 NextDent TM LC-3DPrint Box
Chamber Inside
- Cover Locking Sensor: sensor for opening and closing. The machine does not work when opened.
- Temperature Sensor : In case the temperature inside the chamber reaches over 45°C, the machine stops automatically and Err 1 will appear on the display.
- Rubber O-ring
- lamp holding clamp - Reflection plate
- lamp Socket
- metal grid with handles
When replacing the lamps, always disconnect the power cable, or switch off the machine.
Do not open the cover when the machine is switched on.
5.0 Operating NextDent TM LC-3DPrint Box
User's Instruction Manual
- lamp holding clamp - Reflection plate
- lamp Socket
- rubber O-ring
4
Cover Inside
Printing Model Tray
V.1. 2015.08
5
5.1 Starting mode
- Press the power switch (green button) on the right side.
- When switching on the machine, the version information message (version: V102) will appear
on the display.
- After two seconds, the last operation time will appear on the display.
5.2 Operation Mode
- When the last operation time has appeared on the display, the user can choose a preset time by
holding the program button. Or the user can increase or decrease the operation time by pressing the increase or decrease button.
- A user can start the machine by pressing the start/stop button. the time will count down and the
dots will be blinking. (By pressing the start/stop button, the operation time will be memorized automatically.)
- A user can stop the machine by pressing the
start/stop button again.
User's Instruction Manual
- After the operation time, the message "End" will be displayed automatically. At the same time, the
machine beeps 9 times.
6.0 Error messages
Error message by automatic self-checking function during the operation.
- The error message-"OPEN" will appear on the display when a user opens the cover during operation. At the same time, the machine beeps
three hours.
- In case the temperature inside the machine reaches over 45°C, the machine stops automatically and Err 1 will appear on the display.
- when there is a problem with the temperature sensor, the machine stops automatically and Err 2 will appear on the display. (contact distributor)
V.1. 2015.08 NextDent TM LC-3DPrint Box
7.0 Specification
Related voltage: 230VA, 50/60Hz, 1.26A
Power consumption: 290W
Fuse: T2.0A, AC250V
Dimension: W410XD440XH380
Weight: 22 kg
8.0 Manufacturer Information
Vertex-Dental BV
Johan van Oldenbarneveltlaan 62 3705 HJ ZEIST
The Netherlands
T: +31 (030) 697 67 49
F: +31 (030) 695 51 88
E: info@vertex-dental.com W: www.vertex-dental.com
Please note that electrical/electronic units must be disposed off separately. Do not dispose of household waste. The black bar on the "garbage bin" symbol indicates that the unit was put into circulation after August 13, 2005. Please note that the unit is subject to regulation 2002/96/EC (WEEE) and applicable following national laws and must be disposed of off accordingly. Please contact your dealer if the unit needs to be disposed of.
User's Instruction Manual
6
This machine has been developed for use in a 3D printing environment. Liability cannot be accepted for damage resulting from misuse or failure to observe the instructions. Modifications and misprints with reservation.
V.1. 2015.08 NextDent TM LC-3DPrint Box
Tekniske specifikationer
Brand
NextDent
Vægt
25.0 kg
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.
Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.
Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.
Vil du vide mere om vores returregler, læs dem her
Vi ser frem til din ordre 😍
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30