UltiMaker - Air Manager - S5

Air Manager that fits your Ultimaker S5. Ensure that you can print with anything, while maintaining a good indoor climate.

3D printing with more materials with greater peace of mind

If you thought the Ultimaker S5 Air Manager was just a cover for the Ultimaker S5, think again.

This hassle-free integrated unit solves any in-house air quality concerns you may have.

What differences does the Ultimaker S5 Air Manager make in terms of air quality?

Independent researchers found that it removes up to 95% of all ultrafine particles.

While we are proud of this result, it does more than just ensure your health and safety and remove the need for additional ventilation in the workplace. It gives you the confidence and peace of mind to choose materials without compromise. So now you can create the parts and models your business needs, with the mechanical properties your applications require knowing that air quality is not degraded.

The Ultimaker S5 Air Manager has a quiet 140 mm (5.5 inch) fan. It is positioned to create an inside-out airflow that draws the maximum amount of air through a high-efficiency air filter. The filter is large and thus there is a longer time between Ultimaker Connect telling you when it needs to be changed.

You can easily install the Ultimaker S5 Air Manager without tools. Via a robust bracket and a single cable. All other functionality is handled by (and regularly improved via) Ultimaker S5 firmware and Ultimaker Cura software.

This includes material matching fan speeds. Now embedded in Ultimaker Cura's predefined pressure profiles, which ensure that the fan and filter work at optimal efficiency, all the time during your 3D printing.

Keep your prints safe as well as your workplace

With the building chamber fully closed, secure the Ultimaker S5 Air Manager from touching hot or moving parts. And it maintains a more stable printing environment inside the printer.

We have found that this improves the print quality for some of the materials and gives you enormous freedom to 3D print wherever you want - near air conditioners or similar. The choice is yours and you know that your building chamber is protected against unwanted air currents.

Air Manager Specifications:

*Filter technology: EPA filter

*Fan technology: Air extraction by low-noise brushless fan

*Air refresh rate1: - 50 m3/h (35 m3/h nominal rate for most materials at 23°C)

*Filter efficiency: Up to 95%

*Filter replacement: Recommended every 1,500 print hours (approx. 1 year)

*Operating sound: < 51 dBA (including Ultimaker S5)

*Connection (data and power). UMB connection (included)

*Compatible 3D printers. Ultimaker S5

*Compatible materials. Optimized for Ultimaker PLA, Tough PLA, ABS, Nylon, CPE, CPE+, PC, PP, TPU 95A, PVA, Breakaway (Also supports third-party materials)

*Physicaldimensions Dimensions: 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in)

*Dimensions: (including Ultimaker S5) 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)

*Net weight: 3.6 kg (7.9 lbs)

*Supplied software. Ultimaker Cura, our free print preparation software. Ultimaker Connect, our free printer management solution. Ultimaker Cloud, enables remote printing

På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret

Klik her og gå til dokumentation

Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.

Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.

Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.

Vil du vide mere om vores returregler, læs dem her

Vi ser frem til din ordre 😍