Fremragende | Baseret på 600+ anmeldelser
EasyPrint - PETG - Solid Red - 1.75mm - 1 kg
På lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
EasyPrint PETG - 1.75mm - Solid Red
Buy EasyPrint PETG and get an extremely hard, durable and versatile material. This filament has high impact strength, good flexibility and very low material shrinkage. Thanks to its material properties, this PETG filament can be used by most all 3D printers.
Material properties:
* Achieve impressive surfaces with a noble appearance
* EasyPrint PETG is easy to print with
* High material quality and perfect spooling of material on each roll
EasyPrint PETG has very good layer adhesion, which makes it very easy to print with. The 3D Expert recommends printing on SpideSheet, PEI SpiderSheet or glass plate coated with adhesive spray or glue. There is no need for a heated build plate, but if you have one we recommend a setting of 40°- 60°C
See 3D Eksperten's selection of building boards here
See 3D Expert's selection of glues and adhesive sprays here
Essential Data:
Material | PETG |
Diameter | 1.75mm |
Tolerance | ± 0.02 mm |
Heated build platform required | No, but recommended |
Print Temperature | 210 - 235° C |
Weight Filament | 1 kg (1000g) |
Total length on spool | 335 m +/- 1% |
Spool Size | 200 x 66 mm |
Spool Hub Diameter | 54 mm |
Empty spool weight | 142g |
Technical data
Physical | Test method | Value |
Density | ASTM D1505 | 1.27 g/cm3 |
Water Absorption (24 hour immersion) | ASTM D570 | 0.2% |
Rockwell hardness | ASTM D785 | 116 R scale |
Shrinkage | ASTM D955 | 0.2 - 0.5% |
Mechanical | ||
Tensile strength @ Yield | ASTM D638 | 53 MPa |
Tensile strength @ Break | ASTM D638 | 26 MPa |
Elongation @ Yield | ASTM D638 | 5.0% |
Elongation @ Break | ASTM D638 | 70% |
Flexural Strength | ASTM D790 | 80 MPa |
Flexural Modulus | ASTM D790 | 2150 MPa |
Izod Impact Strength (Notched @ 23°(73°F) | ASTM D256 | 90 J/m |
Thermal | ||
Heat Distortion @ 0.455 Mpa | ASTM D1003 | 74° C |
Vicat Softening Temperature | ASTM D1525 | 83° C |
Optical | ||
Light Transmittance | ASTM D1003 | 90% |
EasyPrint PETG is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of PETG, Transparent and solid. With the transparent you will have a high gloss and almost completely transparent print depending on your wall thickness. The solid colors offer a vivid and beautiful surface with a high gloss finish. EasyPrint PETG is a glycol modified PET which means that it has even higher clarity, stiffness and toughness than regular PET.
- Wide temperature range
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 210° – 235° C
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin material. Thanks to the pure material EasyPrint meets the demand of a modern environmentally safe PETG and is REACH and RoHS compliant. There are no additives in EasyPrint which is one of the reasons for the extreme ease of use.
Tekniske specifikationer
Brand
EasyPrint
Vægt
1.2 kg
EAN
7340002113463
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Fragt bliver igennem 3D eksperten beregnet ud fra vægt og destination. Dette gælder udelukkende for pakker til Danmark. Grønland og Færøerne har særlige fragtpriser.
Kontakt os venligst herom for den mest fordelagtige løsning.
Vi leverer fortrinsvis med GLS på pakkeforsendelser og Post Danmark (Maxibrev) til småforsendelser uden tracking og forsikring.
3D Eksperten har variable fragtpriser. Disse priser udmåles automatisk i forhold til din ordrestørrelse/vægt og er tilpasset i henhold til GLS/Post Danmarks leveringspriser. Prisen kan variere fra 29,- til 400,-. ex. fragtforsikringer for særligt udsat gods.
Afhentning kan normalt godt ske fra vores virksomhed mellem kl. 08 og 14 på hverdage, men du SKAL skrive forinden. Det er ikke alle varer der findes på vores eget lager, men sendes direkte fra leverandørerne.
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30