Digital Thermometer

Digital Thermometer

WIDE MEASURING TEMPERATURE RANGE

The range of the main unit is -50° C ~ 1300° C (-58° F ~ 2372° F)

Includes 2 thermocouples that can measure from -50 to 400° C (-58 to 752° F).

Comes with °C, °F and K temperature settings

EASY OPERATION

Operated with 6 simple buttons with clear indications suitable for beginners and professional users. Factory calibrated.

2 Temperature display with DIFFERENTIAL TEMPERATURE (T1-T2) - Apart from Max / Min / Average, Data hold, Auto power off function.

PROTECTED WITH SILICONE CASE

- The main unit is protected by a removable silicon rubber case, it protects your device from an accidental fall and thereby extends its life.

But this thermometer from 3D Eksperten allows you to fine-tune the temperature using the self-calibration function. It has a wide range of applications in furnaces, ceramics, molten metal and many other industrial applications.

• 4 digit large LCD screen
• Celsius and Fahrenheit
• Low battery indication
• Data hold function mode
• Auto Power-off temperature range: -200 ~ 1370 °C (-328 ~ 2498 °F)
• Accuracy: ± (1% 1 °C); ± (1% 2 °F) resolution: 0.1 °C & 0.1 °F
• Type of temperature measurement: K sampling frequency: 2.5x per Sec.
• Operating Temperature: 0 ~ 40 °C (32 ~ 104 °F)
• Operating humidity: 0 ~ 70% (RH)
• Input protection: 60V DC or 24V AC maximum input voltage on any combination input Pins
• Input plug: Accepts standard miniature thermocouple plug Battery: 4 x 1.5 V AAA battery
• Weight: 205g (incl. battery)
• Dimension: 73x146x33mm

The package contains:

1 x digital thermometer
1 x test probe
1 x English user manual

Calibration

1. Normal temperature calibration: Install the batteries while pressing the power key, thermometer shows---,
and then displays a temperature reading, adjust this reading to 25 °, then press the power key again to confirm the calibration.

2. High temperature calibration: When the thermometer is calibrated to normal temperature, connect it to the calibrator,
adjust the calibrator to 50mV voltage output and adjust the thermometer reading to 1235°, press the power key to confirm calibration.

Only professionals are suggested to perform calibration. Improper operation can reduce the accuracy of the thermometer.

På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret

Klik her og gå til dokumentation

Du kan få leveret din ordre til en valgfri GLS pakkeshop, privats- eller erhvervsadresse.

Vi leverer din ordre fragtfrit til en valgfri GLS pakkeshop, hvis du bestiller for over 399 kr.

Du har mulighed for at vælge afhentning i butik. Når du modtager en mail med at din ordre er færdig pakket, kan den afhentes indenfor vores åbningstider, som er mandag til torsdag 9-17.00 og fredag kl. 9-16.30 på vores adresse Amalienborgvej 57 i Nørresundby.

Vil du vide mere om vores returregler, læs dem her

Vi ser frem til din ordre 😍