Fremragende | Baseret på 600+ anmeldelser
3DSUPREME - Isopropanol - 1L
På lager
Leveringstid: 1-2 hverdage
Gratis fragt over 399 kr
Nem og billig retur
Kundeservice alle hverdage
3DSUPREME - Isopropanol 99% is superb when it comes to removing fats, residues and resin from surfaces. It is a must have cleaning agent when you have a resin printer.
It can also be used to level surfaces for FDM print materials containing PVB.
3DSUPREME - Isopropanol is a highly volatile, flammable, colorless, clear liquid used in FDM 3D printing for cleaning components, build plates, and for smoothing certain materials.
For SLA and DLP printing, 3DSUPREME - Isopropanol can be used to remove and dissolve uncured resin from printed objects. Due to its rapid evaporation, it dries quickly. Therefore, the container should not be open longer than necessary.
For good results diluted to 70% isopropanol and 30% distilled water for leveling FDM 3D printed means.
For removing uncured resin from SLA or DLP.
Use gloves for handling resin. Immerse the finished item in the resin cleaner for 1 to 5 minutes. Check the process every minute and shake the model in the solution to improve removal. After successfully removing uncured resin, allow the model to dry and cure according to the manufacturer's guidelines.
HAZARD AND PRECAUTIONARY STATEMENTS
- UN Number 1219
- Signal word Danger
HAZARD STATEMENTS
- H225 Highly flammable liquid and vapour.
- H319 Causes serious eye irritation.
- H336 May cause drowsiness or dizziness.
PRECAUTIONARY STATEMENTS
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P240 Ground/bond container and receiving equipment.
- P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
TECHNICAL DATA CHEMICAL
- Color clear odor typical
- Chemical Formula C3H8O
- CAS Number 67-63-0
- Chemical Type Solvent
- Density 0.786 g/cm3 (20°C)
DISPOSAL OF ISOPROPANOL
Isopropanol must be disposed of as special waste (paints and varnishes) at the local waste collection point.
Tekniske specifikationer
Brand
3DSUPREME
Vægt
1.2 kg
På linket nedenfor, finder du en mappe med alt dokumentation for 3D printere, filamenter mv. Den vil løbende blive opdateret
Fragt bliver igennem 3D eksperten beregnet ud fra vægt og destination. Dette gælder udelukkende for pakker til Danmark. Grønland og Færøerne har særlige fragtpriser.
Kontakt os venligst herom for den mest fordelagtige løsning.
Vi leverer fortrinsvis med GLS på pakkeforsendelser og Post Danmark (Maxibrev) til småforsendelser uden tracking og forsikring.
3D Eksperten har variable fragtpriser. Disse priser udmåles automatisk i forhold til din ordrestørrelse/vægt og er tilpasset i henhold til GLS/Post Danmarks leveringspriser. Prisen kan variere fra 29,- til 400,-. ex. fragtforsikringer for særligt udsat gods.
Afhentning kan normalt godt ske fra vores virksomhed mellem kl. 08 og 14 på hverdage, men du SKAL skrive forinden. Det er ikke alle varer der findes på vores eget lager, men sendes direkte fra leverandørerne.
Kundeservice
Email: info@3deksperten.dk
Telefon: +45 30 20 22 17
Mandag til torsdag: 9:00 - 17:00
Fredag: 9:00 - 16.30